This document (last updated 2/2/96) hails from http://www.mips.com/r10k/UMan_V1.1/R10K_UM.cv.html
-- always reference the above link, for the most current, up-to-date version of this page.

Mips - Open Risc Technology

R10000 Microprocessor User's Manual-Version 1.1

January 24, 1995

MIPS Technologies Inc.
2011 N Shoreline Blvd
PO Box 7311
Mountain View, CA 94039-7311

Version 1.1 is same as the version 1.0 updated as per the errata, released on Dec. 20th 1995. The changes made due to this errata are properly marked and are linked to the errata document. You have the following options to view the document:

Disclaimer: The above html version was converted from a frame document using the tool "webmaker". We have tried to review the html document as thoroughly as possible; however, due to the size of the document we might have missed somethings. We will appreciate any comments and suggestions you can provide us that will improve the document. Also, when in doubt, please look at the postscript version of the document.

R10000 are registered trademarks of MIPS Technologies, Inc. This document contains information that is proprietary to MIPS Technologies, Inc.

MIPS Technologies, Inc. reserves the right to change any products described herein to improve the function or design. MIPS Technolgies, Inc. does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under patent rights nor imply the rights of others.

Return to the R10000 Microprocessor page.